Additional information
Weight | 1 lbs |
---|
Accessories include 3 sets of new CE wire leads with rectangular CE jack, carrying case, and instructions. Does not include battery.
Converter Jack (sold separately) converts rectangular CE jack to 3.5mm jack for use with all 3.5mm jack accessories.
Note: When using 9-volt Duracell Batteries with the ES-130, a thin shim (or paper) must be placed at the bottom of the battery to make proper contact (ie, Duracell are shorter in length). Also, in order to use the built-in battery check (located on the back side of unit), power must be turned on.
Specifications | 500 ohm test load |
Output channels | 3 independent intensity channels |
Frequency L – 1 to 20 Hz (adjusted with M – 20 to 150 Hz fine frequency dial) |
L – 1 to 20 Hz |
M – 20 to 150 Hz | |
H – 150 to 500 Hz | |
Low volts & current | 0 to 10 volts, 0 to 20 milliamps |
Hi volts & current | 0 to 20 volts, 0 to 40 milliamps |
Voltage, max | 30 volts (100 kohm load) |
Pulse width | 100 microseconds (ï¾µS) |
Pulse shape | asymmetric biphasic square wave |
Pulse mode | continuous |
Power source | one 9 volt battery (not included, Energizer brand recommended) |
Freq indicator | flashing red light |
Size, wt, color | 4.5″ x 3.2″ x 1.2″, 0.3 lbs, gray |
Weight | 1 lbs |
---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.